How To Calculate pente pmr (pmr slope) For Your Office Space: A Simple Guide

When designing your office space, you need to think about the flow of everyone who will be using it, depending on how many people will be working in the space, you need to plan carefully for how people will access different areas and what features are necessary for their work. 

To design a successful office layout, you need to consider several factors, one of these is the ramp between different areas. 

Ramp or slope in this context refers to the gradual incline of a set of steps or an inclined surface that leads from one level to another. It’s important to consider both the length and steepness of ramps when creating a layout so that everyone has sufficient access as they move around. Read on for more information about designing office space with ramps.

How to Calculate the Length of a Ramp

Start by measuring the length of each step of the ramp you want to install then, you will need to measure the length of the ramp itself, for example, if the length of each step on the ramp is 10 feet, and the length of the ramp is 20 feet, then the ramp will have a slope of 50 degrees. 

Calculate the length of the ramp based on the length of each of the steps on the ramp, and then add that length to the length of the ramp, you will use the same units for each measurement, for example, both the steps and the ramp should be 10 feet long, so you’d measure the ramp as 20 feet.

How to Find Total Rise and Run for an Office Space with a Ramp

Once you’ve determined the length of the pente pmr (pmr slope), you can find the total rise and run for the entire space, you need to add the length of the ramp to the length of each step and then find the addition, to do this, you start with the distance from one floor to another. 

Then, you add the rise of the ramp, which is the length of the ramp plus the length of each step, finally, you add the run, which is the length of the ramp less the height of each step.

How to Calculate the Length of Slope for Office Space

After you’ve figured out the total rise and run for your office space with a ramp, you can figure out the length of the slope for each floor, you can do this by dividing the rise by the run, then dividing by two. This will give you the slope of each floor. 

So, if the rise is 200 feet and the run is 100 feet, then the slope of the ramp is ½, of course, the more accurate you want to be, the more you need to simplify this calculation. To find the slope of the ramp, you can simplify the calculation in a few different ways.

How to Find Total Descent for an Office Space with a Ramp

Once you have the length of the ramp, you can find the total descent for your office space, total descent is the amount that is added to the beginning of each floor, from top to bottom. 

To find the total descent for each ramp, you start with the total rise and run for that floor, you need to add the length of the ramp to the total rise for that floor and then subtract the length of the ramp from the total descent for that floor.